Facet 'Fast Road' Cube electronic fuel pump. Offered in a range to suit low powered vehicles through to a competition model for higher powered, low capacity carburettor engined race and rally cars. All these pumps require mounting within 12 inches of the fuel tank and it is recommended to slightly over specify to allow for a small pressure drop if the tank is mounted at the opposite end of the car to the engine.
These standard pumps don't come with an internal check valve, but for a little extra the same model can be purchased with a check valve installed as required. Many of these pumps are also available as a kit with inlet/outlet fittings, rubber mounts and an earth strap. All Cube pumps require a filter union on the inlet side to ensure no damaging particles enter the pump from the fuel tank.
-
4.5-7.0psi standard Cube pump only, no fittings
-
Suitable for low powered standard classic road cars
-
Features 1/8" NPTF female inlet and outlet ports
