The R-Tech 12V Micro Heater Package Contains:
1 x Rallynuts 2.2Kw 12v Micro Heater
Specification:
-
Weight 0.59kg
-
12v, 0.7 amps (continuous)
-
Electrical consumption 8.4 w
-
Typical airflow 80cfm
-
Air hose size 60-63mm (2.5")
-
13mm (1/2”) hose connections
-
Copper/Brass heater core construction
1 x Rotary Heater Control knob - Bowden Operated
A high-quality mechanical Heater Control Knob to operate Bowden controlled heater valves. This control knob has 270° of rotation and has 3 hole positions to offer 30 - 40mm of cable travel.Please note that a push to close valve is required so that the dial will match with the indication on the fascia of the control k
1 x 4 Position Fan Switch with Knob
This 4 position fan switch can be used to control blowers and fans that have a built in resistor pack.
This switch can handle up to 28v and 20a of current draw.
1 x Rallynuts 2.5" Neoprene Ducting Hose
1 x Type A Bowden Cable - 0.5m
A high-quality Bowden Cable with a solid core to allow push and pull control. The Type A Bowden Cable has stepped ends and therefore is compatible with our Rotary Control Knobs, a select number of our water valves, air junctions and Y connectors with internal flap.
1 x Rallynuts 13mm EPDM Coolant Hose (1M)
-
Inside Diameter: 13mm (1/2")
-
Outside Diameter: 21mm
-
Min Bend Radius: 130mm
-
Weight: 300g/m
-
Temp Range:-30°c to 120°c
-
130 PSI (9 BAR) Working pressure
-
390 PSI (27 BAR) Minimum burst pressure
-
Conforms to SAE 20R3 C (212) standards
